Technica

EMC MEDIA CONVERTER 

100BASE-T1 MEDIACONVERTER_EMC SET
DESCRIPTION

100BASE-T1 MEDIACONVERTER_EMC SET from Technica Engineering is the first commercial tool for EMC validation of 100BASE-T1 ECU’s. It works in a pair-set, converting 100BASE-T1 (a.k.a BroadR-Reach (TM from Broadcom)) to optical fiber and back to 100BASE-T1 and is specially designed to emit below the industry’s EMI standard requirements.

No packages are stored or modified in the device. The process is a pure physical layer conversion.

100BASE-T1 MEDIACONVERTER_EMC SET is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology.

FEATURES
  • Converts 100BASE-T1 (a.k.a Broadcom BroadR-Reach) 100 MBit/s full duplex 1 x twisted pair unshielded to optical fiber and back to 100BASE-T1
  • Master/slave configuration
  • HalfOut/FullOut configuration
  • Power requirement: 10 to 13 Vold DC (nominal 12 Volt DC), power consumption: 3 Watt
  • Stainless steel housing
  • Status LEDs
  • Configuration DIP switches
  • Automotive MQS connector included (Power, 100BASE-T1)
  • Optical Fibre via SFP modules (modules and fibre included in the set)
  • Size: 92 x 63 x 30mm

BROADR-REACH SPY MINI

Product Info Sheet

1000BASE-T1 SPY MINI
DESCRIPTION

The 1000BASE-T1 SPY mini is the first device to allow the direct capture of 1000BASE-T1 (Automotive Gigabit Ethernet) traffic with optional timestamping with 40 ns resolution to Standard Gigabit Ethernet.

A clock synchronization with the 100BASE-T1 SPY 12 port is provided via internal 802.1AS implementation.

In logging mode the data Frames can be enhanced with additional information: the exact timestamp with 0.04 µs resolution and the bus port the data was originally received on. All data can be recorded on a PC or datalogger for detailed offline analysis.

Different SPY modes are allowed:

    1. Copying each direction of 1000BASE-T1 Traffic to one independent RJ45 interface
    2. Allowing copy of both directions of 1000BASE-T1 Traffic to only one RJ45 interface, assuming less than 500Mbps traffic bandwidth in each direction.
    3. Use as Dual Media Converter.
FEATURES
  • 2 x 1000BASE-T1 Ports
  • Samples data frames directly without influencing the original network.
  • 2x Gigabit Ethernet Ports
  • Power requirements: 12 Volt DC Nominal (8-16 Volts), 4 to 7 Watt
  • 6x 3V3 Bidirectional Trigger signals
  • DIP switches for easy configuration
  • Robust steel case
  • Size: 120x118x28 mm
  • Timestamp with 0.04 µs resolution selectable
  • Can be synchronized via 802.1AS with other devices, such as 100BASE-T1 SPY 12 Port

100 Base-T1 Media Converter

Product Info Sheet

100BASE-T1 MEDIACONVERTER_NXP
DESCRIPTION

The 100BASE-T1 MediaConverter_NXP establishes one direct point-to-point conversion between automotive ECU’s using 100BASE-T1 and any standard Fast Ethernet device with RJ-45 connector.

No packets are stored or modified. It uses the NXP TJA1100_MRA4 Phy.

100BASE-T1 MediaConverter_NXP is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology.

FEATURES
  • Convert 100BASE-T1 100 MBit/s Fullduplex 1 x Twisted Pair unshielded to Fast Ethernet 100BASETX Fullduplex 2 x Twisted Pair shielded or unshielded.
  • Master / Slave configuration
  • HalfOut / FullOut configuration
  • Power requirement: 8 to 16 Volt DC, Power consumption: 2 Watt
  • Massive stainless steel housing
  • Status LEDs
  • Configuration DIP switches
  • Automotive MQS connector included (Power, 100BASE-T1)
  • Standard Ethernet RJ45 connector
  • Size: 92 x 63 x 28 mm
100BASE-T1 MEDIACONVERTER BCM
DESCRIPTION

The 100BASE-T1 MediaConverter BCM establishes one direct point-to-point conversion between automotive ECU’s using 100BASE-T1 and any standard Fast Ethernet device with RJ-45 connector.

No packets are stored or modified. First on the market and highest proven reliability. It uses the Broadcom BCM89810 Phy.

100BASE-T1 MediaConverter BCM is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology.

FEATURES
  • Converts IEEE 100BASE-T1 100 MBit/s Fullduplex 1 x Twisted Pair unshielded to Fast Ethernet 100BASETX Fullduplex 2 x Twisted Pair shielded or unshielded
  • Broadcom 100BASE-T1 Technology
  • Master / Slave configuration
  • HalfOut / FullOut configuration
  • Power requirement: 8 to 16 Volt DC, Power consumption: 2 Watt
  • Massive stainless steel housing
  • Status LEDs
  • Configuration DIP switches
  • Automotive MQS connector included (Power, 100BASE-T1)
  • Standard Ethernet RJ45 connector
  • Size: 92 x 63 x 28 mm

USB BROADR-REACH CONVERTER

Product Info Sheet

USB-100BASE-T1 CONVERTER
DESCRIPTION

The USB 100BASE-T1 Converter from Technica Engineering allows you to expand your PC/Laptop with an additional Network Interface Card with the in-built USB-LAN chip and to interact directly with your 100BASE-T1 (a.k.a. BroadR-Reach ™) device with only one device. The power supply for the converter is provided by the USB port.

Windows and Linux drivers available. It uses the widely used micro-USB and one Broadcom BCM 89811 phy.

Thus the USB 100BASE-T1 Converter is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology.

FEATURES
  • Converts Broadcom 100BASE-T1 100 MBit/s full duplex 1x unshielded twisted pair (UTP) to USB-LAN
  • Master/slave configuration through a windows tool (Linux driver available)
  • Power requirement: 5V DC provided from USB 2.0
  • Small size device as portable solution
  • Status LEDs
  • Automotive MQS connector included (100BASE-T1)
  • Standard USB Connector
  • Size: 60 x 42 x 19mm

MEDIA GATEWAY

Product Info Sheet

DESCRIPTION

MediaGateway from Technica Engineering is a development tool for testing and analyzing on-board vehicle networks.

MediaGateway from Technica Engineering is the most widely used development and testing tool for on-board vehicle networks using 100BASE-T1. It’s in-built automotive switches and 12 x 100BASE-T1 ports enable both capture of traffic between devices while maintaining the normal communication, as well as interaction with such devices via your test set-up. It supports single and double tagging of VLANs, Mirroring, Forwarding and more.

MediaGateway is excellently suitable for subsystem testing stations and can also be installed in a test vehicle without complications. It is configured conveniently via a browser through the integrated web server.

An additional and optional CAN-Ethernet bi-directional conversion is available, as well as FlexRay logging via Ethernet and one SFP slot.

The SFP slot supports commercial-grade SFP modules (e.g. optical or RJ-45) as well as our 100BASE-T1 SFP Module in order to get a 13th Automotive Ethernet Port or our 1000BASE-T1 SFP Module – this makes the MediaGateway ready for Automotive Gigabit Ethernet!

FEATURES
  • 12 Broadcom 100BASE-T1 ports (100 MBit/s full duplex on a single unshielded twisted pair)
  • 3 Gigabit Ethernet ports
  • 1 SFP Gigabit Ethernet port
  • Automotive Tyco MQS connectors for 100BASE-T1 and power supply
  • Web server for easy configuration: Master/Slave, HalfOut/FullOut, Port Forwarding, Port Mirroring, VLAN Tagging
  • WakeUp function by CAN Bus or Wakeline
  • Power output for attached devices: VBAT max. 1 Ampere in total
  • 19 status LEDs
  • Possibility to reset to default settings by pushbutton
  • Robust steel case
  • Power requirement: 8 to 16 V DC, power consumption: 8 Watt
  • Size: 195 x 143 x 33 mm
  • 802.1AS Bridge function

ANDI TEST ENVIRONMENT

Product Info Sheet

DESCRIPTION

ANDi is a test and simulation environment for Ethernet electronic control units (100BASE-T1 / 1000BASE-T1) and also for the CAN/CAN-FD, LIN and FlexRay bus systems. The ANDi environment supports electronic control unit developers with the validation of their ECU functions by means of generated residual bus simulations and intelligent message generators. A traffic viewer with signal graph display and seamless support of automotive databases (Fibex, ARXML, DBC, LDF) make it ultimately flexible and practical. Through the support of Technica Engineering and other hardware, as well as .net extensions, ANDi can be used as a powerful tool for complex ECU test and test automation.

ANDi helps test teams to validate their ECU functions throughout the test process (planning, development, realisation and reporting).

As opposed to other ECU developer tools, ANDi can be used to validate tests quickly and easily.

ANDi is particularly flexible and user-friendly; thanks to its scope of functions, its expandability and its graphical user interface.

How to get ANDi:

  1. Under the following URL, you can download the newest version of ANDi: ftp://ftp.technica-engineering.de/ANDi/ (release notes in Tool)
  2. Please download the *.exe File and install it on your Windows computer
  3. After installation and on the first execution of ANDi, a Dialog will appear with a Product Number. Please send us this number at (andi@technica-engineering.de) in order to get your 30 day trial license
  4. In order to purchase a full-time license, send us an Email (order@technica-engineering.de) with your commercial information in order to get a quotation for an ANDi license
FEATURES
  • MAC_VLAN, ARP
  • IEEE_PTP_v2
  • IEEE_1722
  • TCP, UDP, UDP_NM
  • DHCP, HSFZ
  • SOMEIP, SOMEIP_SD
  • IPv4, IPv6
  • DoIP (ISO 13400)
  • Fibex, ARXML, DBC, LDF

MEDIA CONVERTER

1000BASE-T1 MEDIA CONVERTER
DESCRIPTION

The 1000BASE-T1 MEDIA CONVERTER establishes one direct point-to-point conversion between automotive ECU’s using 1000BASE-T1 and any standard Gigabit Ethernet device with RJ-45 connector.

No packets are stored or modified. Both 1000 Mbps and 100 Mbps modes are available with the Marvell 88Q2112 Phy.

Thus, the 1000BASE-T1 MEDIA CONVERTER is the ideal solution for working quickly and efficiently with the new 1000BASE-T1 technology.

FEATURES
  • Converts IEEE 1000BASE-T1 (1000 MBit/s full duplex) 1x unshielded twisted pair (UTP) to Gigabit Ethernet (1000BASE-T)
  • Master/slave configuration
  • RJ-45 Connector
  • Stainless steel housing
  • Status LEDs
  • Configuration DIP switches
  • Automotive Tyco Nano MQS connector and cables included (Power, 1000BASE-T1)
  • Size: 95 x 95 x 32mm

UNIVERSAL EMC DEVICE

DESCRIPTION

The Universal EMC Device is a revolutionary testing equipment which can perform data logging and traffic generation under high electromagnetic radiations and without influencing your measurements.

Universal EMC Device is an ideal tool for testing the performance of newly developed devices under tough environmental conditions. With only one Fiber optic Ethernet connection, you will have access to all the automotive buses. The device will automatically take care of the conversion between Gigabit Ethernet and the automotive standard buses, bidirectionally.

Featuring communication buses like LIN, CAN/CAN-FD, 100BASE-T1 and FlexRay makes the device suited for a vast range of applications. All these functions can be simply configured using the integrated website.

FEATURES
  • 6x CAN/CAN-FD
  • 4x 100BASE-T1 Ports
  • 2x SFP GB Ethernet Ports
  • 2x LIN channels
  • 1x FlexRay Channel A
  • 1x OBD port (Fast Ethernet)
  • 1x Reset button
  • 18x Status LED
  • Power Requirement: 12 Volt DC Nominal (8-16 Volt), 4 to 7 Watt
  • Robust stainless steel case
  • Size: 135 x 132 x 30

EMC CONVERTER

1000BASE-T1 EMC CONVERTER
DESCRIPTION

The 1000BASE-T1 EMC Converter is especially designed for measurements within the EMC chamber. It is delivered in a Set with an adapter board which enables internal PHY status readings and provides one point-to-point connection between Automotive Gigabit Ethernet and SFP Gigabit Ethernet, with which optical fibre modules are used.

The device provides an SFP Port to connect a standard Ethernet RJ45 module or to use an optical Gigabit Ethernet SFP Module. No packages are stored or modified within the device. The process is a direct physical layer conversion, where the hardware was especially developed and optimized to provide the best possible EMC behavior.

Thus, the 1000BASE-T1 Converter EMC is the ideal solution for working quickly and efficiently with the new 1000BASE-T1 technology, and it is the ideal device to perform EMC test through the optical interface.

FEATURES
  • Converts IEEE 1000BASE-T1 (1000 MBit/s full duplex) 1x unshielded twisted pair (UTP) to Gigabit Ethernet (1000BASE-T or optical Ethernet)
  • Master/slave configuration
  • SFP Module allows optical Ethernet connection or standard Gigabit Ethernet through RJ45 Connector
  • Allows to perform EMC test through the optical interface
  • Stainless steel housing
  • Status LEDs
  • Configuration DIP switches
  • Automotive MateNET connector and cables included (Power, 1000BASE-T1)
  • Size: 95 x 95 x 32mm

100BASE-T1 SPY-12 PORT

DESCRIPTION

The 100BASE-T1 SPY 12 port is a highly specialized test and evaluation tool for seamless capture of multiple in-vehicle-network technologies. It provides comon timestamping of all incoming messages and delivers the traffic via Standard Gigabit Ethernet.

Its 12 x 100BASE-T1 ports enable the capture of AVB/TSN traffic, since the latency is symmetrical and deterministic.

Several devices can be synchronized with each other using RJ-45 cables via an internal 802.1AS implementation if more interfaces are needed.

Optionally other Use Cases as Frame Generator, Fault Injection, Data Manipulation, Trigger Generator can be upgraded.

FEATURES
  • 12x 100BASE-T1 Ports
  • 4x Gigabit Ethernet Ports
  • 1x Fast Ethernet Port for status output, configuration and webserver
  • 5x CAN / CAN-FD Ports
  • 1x LIN
  • 1x SMA Trigger
  • 1x FlexRay Channel A
  • 1x SD Card for configuration and storage of trigger events
  • Power Requirement: 12 Volt DC Nominal (7-16 Volt), 10 Watt
  • Stainless steel case
  • Size: 147 x 124 x 26mm
  • AVB/TSN Capture Capable

100BASE-T1 SFP MODULE

DESCRIPTION

The 100BASE-T1 SFP Module is the optimum solution to convert between 100BASE-T1 and SGMII. It fits into a standard Small Form-factor Pluggable (SFP) and generates 100 Mbit/s full-duplex 100BASE-T1.

It configures itself to Automotive 100BASE-T1 after power up. Master/slave mode of operation can be set with the DIP switch.

Registers of the integrated Transceiver are accessible via I2C interface for diagnosis and reconfiguration.

It works seemlesly with our MediaGateway, which has one SFP slot. In any other case, please contact us for more info.

FEATURES
  • 100BASE-T1 and SGMII converter
  • Fits into a standard SFP Slot
  • Power requirements: 3.3 Volt DC
  • Supports I2C for internal register access
  • DIP switch for Master/ Slave configuration
  • Size: 68 x 14 x 14 mm

1000BASE-T1 SFP MODULE

DESCRIPTION

The 1000BASE-T1 SFP Module is the cutting-edge solution to convert between 1000BASE-T1 and SGMII. It fits into a standard Small Form-factor Pluggable (SFP) and generates 1000 Mbit/s full-duplex.

It configures itself to Automotive 1000BASE-T1 after power up. Master/slave mode of operation can be set with the DIP switch.

Registers of the integrated transceiver are accessible via I2C interface for diagnosis and reconfiguration.

It works seemlesly with our MediaGateway, which has one SFP slot. In any other case, please contact us for more info.

FEATURES
  • 1000BASE-T1 and SGMII converter
  • Fits into a standard SFP slot
  • Power requirements: 3.3 Volt DC
  • Supports I2C for internal register access
  • Status LEDs
  • DIP switch for Master/ Slave configuration
  • Size: 68 x 14 x 14 mm